DEVELOPMENT OF A LABORATORY PIN ON DISC WEAR TEST MACHINE
DOI:
https://doi.org/10.60787/jnamp-v66-313Keywords:
Equipment, Machines, Pin on disc, wear rate, Laboratory and DesignAbstract
A Pin on disc wear rate testing machine has been successfully developed. This is a pointer that local content can be built within our research space and institutions. The development became necessary as it serves as a boost in the utilization of locally made materials for the production of laboratory equipment. The development of the laboratory machine was carried out by designing for the various machine components using mathematical formulae and graphical modeling. The designed laboratory equipment developed a turning torque of 9.55Nm which produced a centrifugal force of 318.3N. The diameter of the solid shaft and power transmitted by belt and belt weight were calculated to be 27mm, 1758.23watt and weight of 15.4N respectively. The developed machine in capable of competing with imported Wear test laboratory equipment.
Downloads
References
Ravindranath, B. S., Murthy, B. R. N., Ramu H. C. and Sandeep, N. S.(2021). Process parameters Optimization of Pin on disc wear test to reduce wear loss of Aluminium alloys using Taguchi Design. Engineered Science, Vol. 16, No.1, Pp.366-373.
Agarwal, G., Parnaik, A. and Sharma, R. K (2013). Parametric Optimization and Three-Body Abrasive Wear Behavoir of Sic Filled Chopped Glass Fiber Reinforced Epoxy Composites. International Journal of Composite Materials, Vol. 3,No.2, Pp.32-38.
Mudakappanavar, V.S. and Nanjundaswamy, H. M. (2013). Multi-objective Optimization of Process Parameters During Solidification of Hypoeutectic Al-Si Alloy Casting Using Genetic Algorithm. International Journal of Latest Trends in Engineering and Technology , Vol. 2, No. 4, Pp.424-434.
Ameen, H.A., Hassan, K.S. and Mubarak, E. M (2011). Effect of loads, Sliding Speeds and Times on the Wear rate for Different Materials. American Journal of Scientific and Industrial Research Vol.2, No.1, Pp. 99-106.
Azhagan, M. T., Mohan, B. and Rajadurai, A. (2014). Optimization of Process Parameters to Enhance the Hardness on Squeeze Cast Aluminium Alloy AA6061. International Journal of Engineering and Technology, Vol.6, No.1, pp. 183-190.
Hassan, Z., Pandey, R.K. and Sehgal, D. K. (2011). Wear characteristics in Al-SiC Particulate Composites and the Al-Si Piston Alloy. Journal of Minerals and Materials Characterization and Engineering, Vol.10, No.14, pp.1329-1335
Haque, M.M and Sharif, A. (2001). Study on Wear Properties of Aluminium-Silicon Piston Alloy. Journal of Materials Processing Technology,Vol.1, No.8 pp. 69-73
Kharthik, M. N., Rohit, B., Bahett, N. N., Rohan, M. and Bhaskar, A. (2019). Fabrication of Wear Test machine, International Journal of Science and Research, Vol. 8, No. 4, pp.1863-1866.
Kumar, R. and Grewal, C (2013). Improvement in Hardness of LM-6 Aluminium Green sand Castings by Taguchi Method. Asian Journal of Engineering and Applied Technology,Vol.2, No.2, Pp.11-18
Mohiuddin, V.,Krishnaiah, A. and Hussainy, F. (2015). Influence of Sand Moulding Process Parameter on Product Quality of Al-Si Alloy casting –An ANOVA Approach, International Journal of Advanced Research in Science and Engineering, Vol. 2, No. 4, Pp. 1751-1760
Khurmi, R. S. and Gupta, J. K.(2005). Machine Design. Third Edition, New Delhi; Eurasia Publishing Ltd.
Sharma, P. C. and Aggarwal, D. K. (2012). A Textbook of Machine design. Twelfth Edition, S. K. Kataria and Sons, Daryaganj, New Delhi, India
Abdulwahab, U. , Ndaliman, M. B. , Olugboji, O. A. and Bala, K. C.,(2022). Development of a Dual Condition Pin on Disc Automated Wear Test machine, Proceedings of the &7th North American international Conference on Industrial Engineering and Operations Management, Orlando, Florida, USA,
Ramesh, B. T., Arun, K. and Swamy, R. P. (2015). Dry Sliding Wear Test Performed on Pin on Disc Test Set up for Aluminium Alloy and Metal Matrix Composite composite, International Journal of Innovative Science, Engineering and Technology, Vol. 2, No. 6, 264-270.
Hashim, N. S., Abbas, I., Syahirah, Fadhil, M. and Abdul, A., (2016). Design and development of Pin on Disc Wear Tester, 2nd Integrated Design Project Conference Proceedings, University of Malaysia, Pahang, pp.1-19.
Mansi, I., Rohit, V.,Ravi, V. and Sandeep, S. (2018), Optimization of Pin on Disc Wear Experimental Test, IAETSD Journal for Advanced Research in Applied Sciences, Vol. 5, No. 4, pp.596-602.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 The Journals of the Nigerian Association of Mathematical Physics
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
